« 木星観望中のショット | ブログトップ | クーモニカ揃った »

2004年03月24日 (水曜日)

Sarge鯖を2台体制にした  カテゴリー [PC]

左側のスリムPCをminamiさんにいただいたので、2台体制にしてみようと思った。そして、SargeのDebianインストーラを試してみた。新インストーラ、スバラシイ。こりゃDebian飛躍しそう…。
この鯖は、通常は落としておいて、緊急時に即動かせるようなバックアップ機なつもり。
IMG_3469.jpg

これ
https://www3.tepco.co.jp/istep/DV/MDVE09.htm
申し込んでみた(^^;。今さら…。

eth0がVIA、eth1がRTLに割り当てられて、VIAの方使ったけれど、RTLの方が負荷低いのかなぁ…。

# dmesg
Linux version 2.4.25-1-386 (herbert@gondolin) (gcc version 3.3.2 (Debian)) #1 Tue Feb 24 0
8:11:13 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
BIOS-e820: 0000000001000000 - 000000000fc00000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
252MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 64512
zone(0): 4096 pages.
zone(1): 60416 pages.
zone(2): 0 pages.
ACPI: Unable to locate RSDP
Kernel command line: root=/dev/hda1 ro
No local APIC present or hardware disabled
Initializing CPU#0
Detected 533.370 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1064.96 BogoMIPS
Memory: 248132k/258048k available (1079k kernel code, 8508k reserved, 465k data, 92k init,
0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
CPU: After generic, caps: 00803135 80803035 00000000 00000000
CPU: Common caps: 00803135 80803035 00000000 00000000
CPU: Centaur VIA Samuel 2 stepping 03
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040116
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/0601] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (2002081Cool Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_
PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co.
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 3276Cool
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3540 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3540k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 92k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hdaVery Happy MA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdcVery Happy MA, hdd:pio
hda: IC35L040AVER07-0, ATA DISK drive
blk: queue d0826520, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [5005/255/63] p1 p2 < p5 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 497972k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
parport0: PC-style at 0x378 [PCSPP,EPP]
lp0: using parport0 (polling).
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe800, 00:40Mad xMad x:76:9b, IRQ 10.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 at 0xd0878000, 00:02Mad xMad x:a0:9d, IRQ 11
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Via 686a/8233/8235 audio driver 1.9.1-ac3
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97 Audio codec, id: VIA97 (Unknown)
via82cxxx: board #1 at 0xDC00, IRQ 12
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:07:29 Feb 24 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
keyboard: unknown scancode e0 5f
keyboard: unknown scancode e0 5f

投稿日時 : 2004年03月24日 19:23 | このエントリーをはてなブックマークに追加 このエントリーをはてなブックマークに追加
blog.galaxiesのQRコード
この投稿のURL:
トラックバック(?)URL:

トラックバック一覧

コメント一覧

投稿記事の関連商品|Amazon

投稿記事と関連するGoogle検索